Simple, occupancy based temperature control.

The Performance Pro™ Multi-fan T85320CC-001 is an easy to install occupancy based temperature control, large display, simple user operation, for control of commercial: fan coil, convensional, water source, heat pump and PTAC.

Occupied Timer

Sets Occupancy Duration for 30 min,1, 2, 3, 4, 5, 6, 16, 20, 24 Hours. Once the timer expires with no detection the thermostat goes into Setback Ramping.

Setback Ramping

Determines how the control will ramp to setback values. Economy - goes directly back to setback values. Comfort 1 - sets back at 1ºF per Hour until the selected setback value is reached. Comfort 2 - sets back at 2ºF per Hour until the selected setback value is reached.

Setback Points

Temperature values can be set to OFF or 50-90F (10-32C).

Low / High Temp Protection

Freeze Protection on this control is set at 40ºF (heat). Over temp protection is set at 110ºF (cool).

Night Lock Protection

To assure comfort settings for guest room operation configuration will hold user setpoints from 10 PM and 8 AM, once occupancy is detected.

Get pro-level performance at your fingertips.

T85320CC-001 2H/2C - Thermostat with Occupancy Sensor